How do I install Tiles by Conie Vallese?

Tiles by Conie Vallese are handmade glazed thick terracotta tiles produced from Spanish clay. Natural variations in colour, dimensions and surface are characteristic of the collection. Before installation, inspect the tiles, mix pieces from different boxes and plan the layout. Use an adhesive suitable for glazed terracotta on a clean, stable and level substrate. A grout joint of 1–4 mm is recommended. Allow the adhesive to cure for approximately 24 hours before grouting, and remove excess grout promptly using a damp sponge.

For detailed instructions, please refer to our Conie Vallese Installation Guide.