How do I install Yvonne Koné's tiles?
Yvonne Koné's tiles are produced from Italian terracotta and are available in glazed and unglazed finishes. Prepare a clean, stable and fully cured substrate. Use a flexible, slow-setting adhesive suitable for glazed terracotta, avoiding rapid-setting products unless specifically approved. A minimum grout joint of 1 mm is recommended. For glazed tiles, use a fine, unsanded grout to protect the surface. The unglazed YV KO 18 Burned is naturally porous and should be sealed with a suitable terracotta sealer. The collection is primarily intended for walls, and floor installation is not recommended.
For detailed instructions, please refer to our Yvonne Koné Installation Guide.