How do I install, grout and seal Blēo Essentials Terracotta tiles?

Blēo Essentials Terracotta tiles are handmade from natural Spanish clay, with subtle variations in colour, texture, dimensions and edges. These characteristics should be considered throughout installation. Before installation, inspect the tiles and mix pieces from different boxes to achieve an even distribution of colour and texture. Install on a clean, dry and stable substrate using a high-quality flexible adhesive suitable for terracotta. For floors, apply adhesive to both the substrate and the back of each tile to ensure full coverage.

We recommend grout joints of approximately 3–5 mm to accommodate natural variations in size. Allow the adhesive to cure fully before grouting, remove excess grout continuously and test darker grout colours beforehand. Terracotta is naturally porous and should always be sealed after installation with a suitable impregnating sealer. This reduces water absorption and helps protect against staining. Periodic resealing may be necessary, particularly in areas exposed to moisture or frequent use.

We recommend professional installation by an experienced tiler.

For detailed instructions, please refer to our Terracotta Installation, Grouting & Sealing Guide.

Need further guidance? Get in touch with us